उत्पाद जानकारी पर जाएं
1 का 5

Waveshare

Waveshare Core405R, STM32F4 Core Board

Waveshare Core405R, STM32F4 Core Board

नियमित रूप से मूल्य R 729.00
नियमित रूप से मूल्य विक्रय कीमत R 729.00
बिक्री बिक गया
सभी ऑर्डर पर मुफ़्त डिलीवरी

hurry! almost sold out...

मुफ़्त शिपिंग

सभी ऑर्डर पर मुफ़्त शिपिंग । पूर्णत: बीमाकृत।

हैंडलिंग समय 1 - 3 कार्य दिवस।

पारगमन समय 7 - 15 कार्य दिवस।

भुगतान और सुरक्षा

आपकी भुगतान जानकारी सुरक्षित रूप से संसाधित की जाती है। हम क्रेडिट कार्ड विवरण संग्रहीत नहीं करते हैं और न ही आपके क्रेडिट कार्ड की जानकारी तक हमारी पहुंच है।

वापसी की गारंटी

किसी भी कारण से यदि आप 7 दिनों के भीतर अपने आदेश से असंतुष्ट हैं तो आप शिपिंग शुल्क घटाकर धनवापसी के लिए इसे नई स्थिति में हमें वापस कर सकते हैं।

भुगतान और सुरक्षा

आपकी भुगतान जानकारी सुरक्षित रूप से संसाधित की जाती है। हम क्रेडिट कार्ड विवरण संग्रहीत नहीं करते हैं और न ही आपके क्रेडिट कार्ड की जानकारी तक हमारी पहुंच है।

गुम/गलत आइटम की गारंटी

यदि आपको लापता/गलत/द्वितीयक पैकिंग आइटम वाला पार्सल प्राप्त होता है, तो कृपया डिलीवरी के 7 दिनों के भीतर हमसे संपर्क करें और प्रासंगिक प्रमाण प्रदान करें। क्षति की स्थिति के आधार पर बोन्ज़ी क्षतिपूर्ति करेगी।

Overview
1. Core405R is an STM32 MCU core board designed for STM32F405RGT6, supports further expansion. It is ideal for starting application development with STM32F family.
2. Minimal ready-to-run system, integrates clock circuit, USB control circuit, USB connector, 3. etc.
3. All the I/O ports are accessible on the pin headers
4. JTAG/SWD programming/debugging interface
5. 2.54mm header pitch, allowed to be plugged-in your application board

What has On Board
1. STM32F405RGT6: The high performance STM32 MCU which features:
- Core: Cortex-M4 32-bit RISC
- Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
- Operating Voltage: 1.8V-3.6V
- Package: LQFP64
- Memories: 1MB Flash, 192+4kB SRAM
- MCU communication Interfaces:
-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x SDIO, 2 x CAN
--1 x USB 2.0 HS/FS device/host/OTG controller with dedicated DMA, on-chip full-speed PHY
--1 x USB HS ULPI (external PHY required)
- AD & DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)
- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
2. AMS1117-3.3: 3.3V voltage regulator
3. MIC2075-2: onboard USB power management device
4. Power supply switch, powered from 5Vin or USB connection
5. Boot mode selection, for configuring BOOT0 pin
6. Power indicator
7. VBUS LED
8. Reset button
9. 8M crystal
10. 32.768K crystal, for internal RTC with calibration
11. JTAG/SWD interface: for debugging/programming
12. USB connector, used for establishing USB communication between PC and the STM32 development board
13. MCU pins expander, VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion
14. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG
15. USB jumper
- Short the jumper when using USB
- Open the jumper to disconnect from related I/O port
16. VBAT selection jumper
- Short the jumper to use system power supply
- Open the jumper to connect the VBAT to external power, such as battery

Package Contents
1. Core405R x 1
2. USB type A to Mini-B cable x 1
3. Software CD x 1
पूरा विवरण देखें

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)