उत्पाद जानकारी पर जाएं
1 का 7

PMC Jewellery

Dinosaur Toy Children 3D Printing Pen Low Temperature Painting Brush(Blue)

Dinosaur Toy Children 3D Printing Pen Low Temperature Painting Brush(Blue)

नियमित रूप से मूल्य R 449.00
नियमित रूप से मूल्य विक्रय कीमत R 449.00
बिक्री बिक गया
सभी ऑर्डर पर मुफ़्त डिलीवरी

hurry! almost sold out...

मुफ़्त शिपिंग

सभी ऑर्डर पर मुफ़्त शिपिंग । पूर्णत: बीमाकृत।

हैंडलिंग समय 1 - 3 कार्य दिवस।

पारगमन समय 7 - 15 कार्य दिवस।

भुगतान और सुरक्षा

आपकी भुगतान जानकारी सुरक्षित रूप से संसाधित की जाती है। हम क्रेडिट कार्ड विवरण संग्रहीत नहीं करते हैं और न ही आपके क्रेडिट कार्ड की जानकारी तक हमारी पहुंच है।

वापसी की गारंटी

किसी भी कारण से यदि आप 7 दिनों के भीतर अपने आदेश से असंतुष्ट हैं तो आप शिपिंग शुल्क घटाकर धनवापसी के लिए इसे नई स्थिति में हमें वापस कर सकते हैं।

भुगतान और सुरक्षा

आपकी भुगतान जानकारी सुरक्षित रूप से संसाधित की जाती है। हम क्रेडिट कार्ड विवरण संग्रहीत नहीं करते हैं और न ही आपके क्रेडिट कार्ड की जानकारी तक हमारी पहुंच है।

गुम/गलत आइटम की गारंटी

यदि आपको लापता/गलत/द्वितीयक पैकिंग आइटम वाला पार्सल प्राप्त होता है, तो कृपया डिलीवरी के 7 दिनों के भीतर हमसे संपर्क करें और प्रासंगिक प्रमाण प्रदान करें। क्षति की स्थिति के आधार पर बोन्ज़ी क्षतिपूर्ति करेगी।


1. From imagination to practice, from two-dimensional to three-dimensional to explore artistic talent, enlighten children's multi-dimensional brain and hands-on ability
2. Stepless speed regulation, low temperature not hot
3. Smooth and non-blocking, plug in and use
4. The anti-scald design can be used to draw directly on the skin. It is not hot or sticky and can be used to draw in the palm of the hand. It is a safe choice for children
5. Consumables are safe and biodegradable, low energy consumption eco-friendly materials
6. Comfortable grip and easy operation
7. Accurate roundness, high strength, precise diameter, suitable for all kinds of printing
8. Two-level adjustment, intelligent speed control, uniform and more stable output, direct preheating when plugged in
9. Battery capacity: 800mAh
10. Power supply mode: USB charging/built-in lithium battery
11. Nozzle diameter: about 0.7MM
12. Consumable diameter: about 1.75MM
13. Spinning speed: adjust by yourself
14. Rated voltage: 5V
15. Rated current: 2A
16. Rated power: 10W
17. Discharge method: hot melt extrusion
18. Materials used: environmentally friendly PLA
19. Material: ABS
20. Size: 168 x 25 x 25MM
21. Weight: about 50G
पूरा विवरण देखें

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)