उत्पाद जानकारी पर जाएं
1 का 5

PMC Jewellery

19 in 1 Auto Repair Body Tool Kit Paintless Dent Repair Hail Removal Silver T Bar Slide Hammer Dent Repair Tool Kit

19 in 1 Auto Repair Body Tool Kit Paintless Dent Repair Hail Removal Silver T Bar Slide Hammer Dent Repair Tool Kit

नियमित रूप से मूल्य R 969.00
नियमित रूप से मूल्य विक्रय कीमत R 969.00
बिक्री बिक गया
सभी ऑर्डर पर मुफ़्त डिलीवरी

hurry! almost sold out...

मुफ़्त शिपिंग

सभी ऑर्डर पर मुफ़्त शिपिंग । पूर्णत: बीमाकृत।

हैंडलिंग समय 1 - 3 कार्य दिवस।

पारगमन समय 7 - 15 कार्य दिवस।

भुगतान और सुरक्षा

आपकी भुगतान जानकारी सुरक्षित रूप से संसाधित की जाती है। हम क्रेडिट कार्ड विवरण संग्रहीत नहीं करते हैं और न ही आपके क्रेडिट कार्ड की जानकारी तक हमारी पहुंच है।

वापसी की गारंटी

किसी भी कारण से यदि आप 7 दिनों के भीतर अपने आदेश से असंतुष्ट हैं तो आप शिपिंग शुल्क घटाकर धनवापसी के लिए इसे नई स्थिति में हमें वापस कर सकते हैं।

भुगतान और सुरक्षा

आपकी भुगतान जानकारी सुरक्षित रूप से संसाधित की जाती है। हम क्रेडिट कार्ड विवरण संग्रहीत नहीं करते हैं और न ही आपके क्रेडिट कार्ड की जानकारी तक हमारी पहुंच है।

गुम/गलत आइटम की गारंटी

यदि आपको लापता/गलत/द्वितीयक पैकिंग आइटम वाला पार्सल प्राप्त होता है, तो कृपया डिलीवरी के 7 दिनों के भीतर हमसे संपर्क करें और प्रासंगिक प्रमाण प्रदान करें। क्षति की स्थिति के आधार पर बोन्ज़ी क्षतिपूर्ति करेगी।

1. Different dents can be repaired for the car, such as hail damage, collision damage and other dents.
2. Nothing is lost from the original car of the painting.
3. Very easy to operate.
4. Save money, you do not have to go to 4S store to pay a lot of money to repair.
5. How to use this paintless dent repair kits
(1). Clean the dent with a clean wet cloth;
(2). Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
(3). Use a proper drawing gasket. Large dent requires a large drawing gasket.
(4). Pull the trigger and apply the drawing gasket with extruded glue;
(5). Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
(6). Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
(7). Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
(8). Clean the repaired place with a clean wet cloth.

पूरा विवरण देखें

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)